PROEL LIGHTING LED - Manual do Utilizador descarregar pdf (Página 12)

OPERATION GUIDE

AUTO RUN MODE

The PLLEDST LED blinder allows to run an internal program simply

by setting the dipswitches on rear side.

Activate this function mode by setting the switches 9 and 10 on OFF.

The switch #1 controls the RED colour, the switch #2 the GREEN

colour and the switch #3 the BLUE colour.

The switches from 4 to 6 activate the strobe effect and control the

strobe speed.

SOUND MODE

Setting the blinder in Sound Mode, the projector will work in musical

mode. The blinder receives the acoustic signals by the internal

microphone. To activate this mode, set the switch #10 on OFF and the

switch #9 on ON.

DMX MODE

It is possible to control the device by a DMX controller.

To set the address of the projector, shift the switch #10 on ON

position. The switches from #1 to #9, are used to choose the starting

address of the projector.

The PLLEDST blinder is controlled by four channels.

CH1 CH2 CH3 CH4

RED GREEN BLUE DIMMER e STROBE

1 2 ... 7 8 9 10 11 12 13

Sem comentários

PROEL LIGHTING LED - Manual do Utilizador Página 12